Latex Adhesive

Virsun S-114 Concentrated Latex Admixture is a concentrated latex admix which Is diluted with water on site and then mixed with Virsun -229 to make thick bed adhesive, cement piasters, mortar beds, and screeds. Portend cement mortars which have been modified with Virsun -229 have greatly improved physical characteristics and can be used in exterior, interior, as well as underwater plasters, screeds, and renders. Virsun S-114 can also be used as a primer coat on various drywall boards like Gypsum wall boards, cement backer boards, Calcium Silicate boards, and wood panicle boards before installation of tiles/stones.

Advantages

• Greatly Improved compressive strength
• Lower water absorption
• Improved adhesion
• More plastic mortars
• Reastantto thermal and seismic shock
• boards before tile and stone installation.
• Can be used as a key coat mixing with cement and sand. Can be used for repairs& patching of concrete.

 

Coverage

Coverage 12 mm 50 kg 1.25 litre 3.75 litre 25 sft 25 mm 50 kg 1 litre 4 litre 8 sft 50 mm 50 kg 0.83 litre 4.17 litre 

Virsun Latex S-1198 Concrete Admixture Is suitable for Installing all types of ceramic tile, Vitrified tile, natural stone, and agglomerates. Also for use with Portland cement to make slurry bond coats for mortar beds to give the Improved performance and longer open time. To achieve longer open time under tropical or desert conditions, installation recommendations.  S-1198 Latex admix offers the speed and economy of Portland cement based adhesives with permanent, water-resistant dependability.


Advantages

• Superior shear bond strength - greater than ANSI A118.4 requirements.
• Suff able Substrates
• Concrete
• Cement Terrazzo
• Brick Masonry
• Cement Plaster
• Concrete Masonry
• Cement Backer Board"
• Cement Mortar Beds
• Ceramic Tile and Stone
• Gypsum Wallboard (Interior Only) 'Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.

 

Coverage: Coverage Approximately 200 sft per 20 liter using a 1/4” x 1/4” (6mm x 6mm) notched trowel Coverage will vary depending on trowel notch size, type and size of tile

Virsun S-901 Super Flexible Latex Admixture is an extraordinarily flexible latex additive for use with thin set adhesives and other cement mixes. 

Virsun 901 Super Flexible admix Is specially formulated to provide a strong, super flexible bond to most surfaces, Including plywood. Recommended for Interior and exterior' use with VIRSUN Premium Thin-Set adhesive. 'Used in place of water with thin-set adhesive for Installing ceramic tile, brick, natural stone, porcelain file on Plywood and variety of substrates.

Advantages

• Makes high strength shock resistant adhesive.
• Exceeds ANSI A118.4 shear bond strength requirements Strong, super flexible bond to many surfaces
• Safe and water cleanable, non-hazardous,
• Non-flammable liquid.
• Easy to use
• Sag-resistant Suitable Substrates
• Concrete
• Cement Mortar Beds
• Ceramic Tile and Stones
• Concrete Masonry
• Cement Backer Board'
• Cement Plaster
• Brick Masonry
• Exterior Grade Plywood"
• Asphalt Adhesives'
• Plastic Laminate'
• Cement Terrazzo
• Gypsum Wallboard"
• Vinyl or Other Resilient files" Inferior use only. 'Consult cement backer board manufacturer for specific Installation recommendations and to verify acceptability for exterior use.

Coverage: Coverage Approx. 55-60 sft per 20-liter pail using 1/4" x 1/4"

Virsun Latex S-57 Create Admixture is liquid latex admix mixed with tile adhesive made with Virsun S-57 Crete Admix is more flexible and stronger than conventional Portland cement mortars. This strong bond Is especially important when vitreous and semi-vitreous tiles are installed and also for installation of natural stone and tile on the external wall. Application Vitrified files, ceramic tiles and natural stone in demanding areas. such as external facades, factories, and loading areas, should be set in Virsun S-57 Crete Admix mixed with VS Crete Filler Powder, because of the exceptionally strong bonding, shock and Impact resistance it gives to the adhesive. 

Advantages:
 

• High bond strength
• Increased flexibility
• improved shock & impact resistance
• improved compressive strength
• Reduced water absorption
• Secure bond for vitrified tiles Suitable Substrates
• Concrete
• Brick Masonry
• Cement Plaster
• Concrete Masonry
• Cement Mortar Beds
• Ceramic Tile and Stone
• Gypsum Wallboard.
• Cement Terrazzo

Coverage:

Cement Backer Board "Interior applications only Packaging 20 liter Pat, Coverage Approx 200sft per 201fte using 1/4 Degree x 1/4" (6mrn x 6mm) square notched trowel for a bed of 3mm.Coverage will vary depending on trowel notch size, type and size .